Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 Auto Detect Configuration Commands
3Com Corporation
2-6
2.1.7 timer wait
Syntax
timer wait seconds
undo timer wait
View
Detect group view
Parameter
seconds: Timeout time for a probing attempt. It ranges from 1 to 30 seconds and
defaults to 2 seconds.
Description
Use the timer wait command to set a timeout period for a probing attempt.
Use the undo timer wait command to restore the default timeout period for a probing
attempt.
Example
# Set the probing attempt timeout period to three seconds for detect group 3.
<3com> system-view
System View: return to User View with Ctrl+Z.
[3com] detect-group 10
[3com-detect-group-10] timer wait 3
2.2 Auto Detect Application Commands
 Note:
z For a detailed description of static routing, refer to the “Routing Protocol” part of this
manual.
z For a detailed description of VRRP, refer to the “Reliability” part of this manual.
2.2.1 ip route-static detect-group
Syntax
ip route-static ip-address { mask | mask-length } { interface-type interface-number |
nexthop } [ preference preference-value ] detect-group group-number