Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 MSDP Configuration Commands
3Com Corporation
4-4
4.1.5 display msdp sa-cache
Syntax
display msdp sa-cache [ group-address ] [ source-address ]
[ autonomous-system-number ]
View
Any view
Parameter
group-address: Group address of (S, G) entry.
source-address: Source address of (S, G) entry. With no source address specified, all
the source information of the specified group will be displayed.
If neither group address nor source address is determined, all SA caches will be
displayed.
autonomous-system-number: Displays (S, G) entries from specified autonomous
system.
Description
Use the display msdp sa-cache command to view (S, G) state learnt from MSDP
peer.
Only cache-sa-enable command is configured, can cache state be displayed.
Example
<3Com> display msdp sa-cache
MSDP Total Source-Active Cache - 5 entries
(Source, Group) Origin RP Pro AS Uptime Expires
(10.10.1.2, 225.1.1.1) 10.10.10.10 BGP 100 00:00:10 00:05:50
(10.10.1.3, 225.1.1.1) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.2, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.2.1, 225.1.1.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
(10.10.1.2, 225.1.2.2) 10.10.10.10 BGP 100 00:00:11 00:05:49
MSDP matched 5 entries
4.1.6 display msdp sa-count
Syntax
display msdp sa-count [ autonomous-system-number ]