Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 MSDP Configuration Commands
3Com Corporation
4-5
View
Any view
Parameter
autonomous-system-number: Number of sources and groups from the specified
autonomous system.
Description
Use the display msdp sa-count command to view the number of sources and groups
in MSDP cache.
The cache-sa-enable command must be configured before the configuration of this
command.
Example
<3Com> display msdp sa-count
Number of cached Source-Active entries, counted by Peer
Peer's Address Number of SA
10.10.10.10 5
Number of source and group, counted by AS
AS Number of source Number of group
? 3 3
Total Source-Active entries: 5
4.1.7 import-source
Syntax
import-source [ acl acl-number ]
undo import-source
View
MSDP view
Parameter
acl-number: Number of basic or advanced IP ACL, ranging from 2000 to 3999,
controlling which sources SA messages will advertise and to which groups it will be sent
in the domain. Basic ACL performs filtering to source and advanced ACL performs
filtering to source/group. If no ACL is specified, no multicast source will be advertised.