Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Basic Configuration Commands
3Com Corporation
1-5
1min: Sets the CPU usage statistic interval to one minute.
5min: Sets the CPU usage statistic interval to five minutes.
72min: Sets the CPU usage statistic interval to 72 minutes.
slave: Given a dual-RPU/ERPU supported device, sets the usage statistic interval of
the CPU on the slave RPU/ERPU.
slot slot-num: Given a distributed device, sets the usage statistic interval of the CPU on
the interface board specified by its slot number.
Description
Use the cpu-usage cycle command to set the CPU usage statistic interval.
Depending on the specified interval, the statistical period displayed by executing the
display cpu-usage history command is different.
The default CPU usage statistic interval is 60 seconds.
Example
# Set the CPU usage statistic interval to five seconds.
[3Com] cpu-usage cycle 5Sec
1.1.6 display clipboard
Syntax
display clipboard
View
Any view
Parameter
None
Description
Use the display clipboard command to view the contents of the clipboard.
Example
# Display the contents of the clipboard.
<3Com> display clipboard
-----------------clipboard -----------------
ip route 10.1.0.0 255.0.0.0 eth 0
1.1.7 display clock
Syntax