Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 MSDP Configuration Commands
3Com Corporation
4-10
[3Com] msdp
[3Com-msdp] originating-rp ethernet 1/0/0
4.1.11 peer
Syntax
peer peer-address connect-interface interface-type interface-number
undo peer peer-address
View
MSDP view
Parameter
peer-address: Address of MSDP peer.
connect-interface interface-type interface-number: Interface type and number whose
primary address is used by the local router as the source IP address to establish TCP
connection with remote MSDP peers.
Description
Use the peer command to configure an MSDP peer.
Use the undo peer command to remove the MSDP peer configured.
If the local router is also in BGP peer relation with a MSDP peer, the MSDP peer and
the BGP peer should use the same IP address.
Related command: static-rpf-peer.
Example
# Configure the router using IP address 125.10.7.6 as an MSDP peer of the local router.
<3Com> system-view
[3Com] msdp
[3Com-msdp] peer 125.10.7.6 connect-interface ethernet 0/1/0
4.1.12 peer description
Syntax
peer peer-address description text
undo peer peer-address description
View
MSDP view