Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 MSDP Configuration Commands
3Com Corporation
4-11
Parameter
peer-address: Address of MSDP peer.
text: Descriptive text, being case sensitive. The maximum length is 80 characters.
Description
Use the peer description command to configure descriptive text to MSDP peer.
Use the undo peer description command to remove the descriptive text configured.
By default, an MSDP peer has no descriptive text.
Administrator can conveniently differentiate MSDP peers by configuring descriptive
text.
Related command: display msdp peer-status.
Example
# Add descriptive text CstmrA to router 125.10.7.6 to specify that the router is Client A.
<3Com> system-view
[3Com] msdp
[3Com-msdp] peer 125.10.7.6 description router CstmrA
4.1.13 peer mesh-group
Syntax
peer peer-address mesh-group name
undo peer peer-address mesh-group name
View
MSDP view
Parameter
name: Name of an Mesh Group, being case sensitive. The maximum length is 32
characters.
peer-address: Address of an MSDP peer to be a member of the Mesh Group.
Description
Use the peer mesh-group command to configure an MSDP peer to join an Mesh
Group.
Use the undo peer mesh-group command to remove the configuration.
By default, an MSDP peer is not a member of any Mesh Group.