Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 MSDP Configuration Commands
3Com Corporation
4-13
View
MSDP view
Parameter
peer-address: Address of MSDP peer.
Description
Use the peer request-sa-enable command to enable the router to send SA request
message to the specified MSDP peer when receiving a new group join message.
Use the undo peer request-sa-enable command to remove the configuration.
By default, when receiving a new group join message, the router sends no SA request
messages to MSDP peers but waits to receive the next SA message.
Related command: cache-sa-enable.
Example
# Configure to send SA request message to the MSDP peer 125.10.7.6.
<3Com> system-view
[3Com] msdp
[3Com-msdp] peer 125.10.7.6 request-sa-enable
4.1.16 peer sa-cache-maximum
Syntax
peer peer-address sa-cache-maximum sa-limit
undo peer peer-address sa-cache-maximum
View
MSDP view
Parameter
peer-address: Address of MSDP peer.
sa-limit: Maximum value that the SA cache allows, ranging from 1 to 2048.
Description
Use the peer sa-cache-maximum command to limit the number of caches originated
when the router receives SA messages from an MSDP peer.
Use the undo peer sa-cache-maximum command to restore the default configuration.
By default, the maximum number of SA caches is 2048.