Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 MBGP Multicast Extension Configuration
Commands
3Com Corporation
5-2
# Create a multicast aggregated record in the BGP routing table and set the address of
aggregated route is 192.213.0.0.
[3Com-bgp-af-mul] aggregate 192.213.0.0 255.255.0.0
5.1.2 debugging bgp mp-update
Syntax
debugging bgp mp-update [ receive | send | verbose ]
undo debugging bgp mp-update
View
User view
Parameter
receive: Enables incoming packet debugging of MBGP.
send: Enables outgoing packet debugging of MBGP.
verbose: Enables packet detail debugging of MBGP.
Description
Use the debugging bgp mp-update command to enable MBGP Update packet
debugging.
Use the undo debugging bgp mp-update command to disable the functions.
Example
# Enable MBGP Update packet debugging.
<3Com> debugging bgp mp-update
5.1.3 display bgp multicast group
Syntax
display bgp multicast group [ group-name ]
View
Any view
Parameter
group-name: Name of peer group. If no peer group is specified, the information about
all peer groups will be displayed.
Description