Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 MBGP Multicast Extension Configuration
Commands
3Com Corporation
5-15
By default, MBGP does no filter the received or advertised routes.
Example
# Enable MBGP to filter the routes received from the specified peer group based on the
specified address prefix list.
[3Com-bgp-af-mul] peer group1 ip-prefix list1 import
5.1.24 peer next-hop-local
Syntax
peer group-name next-hop-local
undo peer group-name next-hop-local
View
IPv4 multicast subaddress family view
Parameter
group-name: Name of the peer group.
Description
Use the peer next-hop-local command to remove the processing of the next hop in
routes which BGP will advertise to the peer (group) and set the local address as the
next hop.
Use the undo peer next-hop-local command to remove the existing setting.
Example
# Set the local address as the next hop when advertising routes to peer group named
test.
[3Com-bgp-af-mul] peer test next-hop-local
5.1.25 peer public-as-only
Syntax
peer group-name public-as-only
undo peer group-name public-as-only
View
IPv4 multicast subaddress family view
Parameter
group-name: Name of the peer group.