Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 MBGP Multicast Extension Configuration
Commands
3Com Corporation
5-16
Description
Use the peer public-as-only command to configure only to carry public AS number
rather than private AS number when BGP sends update packets.
Use the undo peer public-as-only command to configure to carry private AS number
when BGP sends update packets.
By default, the private AS number is carried when BGP sends update packets.
Generally, BGP sends update packets with the AS number (which can be either the
public AS number or private AS number). To enable some external routers to ignore the
private AS number when sending update packets to configure not to carry the private
AS number when BGP sends update packets.
Example
# Configure not to carry private AS number when BGP sends update packets to peer
group named test.
[3Com-bgp-af-mul] peer test public-as-only
5.1.26 peer reflect-client
Syntax
peer group-name reflect-client
undo peer group-name reflect-client
View
IPv4 multicast subaddress family view
Parameter
group-name: Name of the peer group.
Description
Use the peer reflect-client command to configure a peer (group) as a client of the
route reflector.
Use the undo peer reflect-client command to remove the existing configuration.
By default, there is no route reflector in the autonomous system.
Example
# Configure peer group named test to be client of the route reflector.
[3Com-bgp-af-mul] peer test reflect-client