Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 MBGP Multicast Extension Configuration
Commands
3Com Corporation
5-17
5.1.27 peer route-policy
Syntax
peer { group-name | peer-address } route-policy policy-name import
undo peer { group-name | peer-address } route-policy policy-name import
peer group-name route-policy policy-name export
undo peer group-name route-policy policy-name export
View
IPv4 multicast subaddress family view
Parameter
group-name: Name of the peer group.
peer-address: IP address of the peer.
route-policy policy-name: Routing policy specified.
import: Applies routing policy to the routes received from the peer (group).
export: Applies routing policy to the routes advertised to the peer (group).
Description
Use the peer route-policy import command to have MBGP apply the specified routing
policy to the routes received from the specified peer or peer group.
Use the undo peer route-policy import command to remove the applied routing
policy.
Use the peer route-policy export command to have MBGP apply the specified routing
policy to the routes advertised to the specified peer or peer group.
Use the undo peer ip-prefix export command to disable MBGP to remove the applied
routing policy.
By default, no routing policy is applied to the received or advertised routes.
Example
# Apply policy 1 to the routes received from the peer group named test.
3Com[bgp-af-mul] peer test route-policy policy1 import