Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 6 Multicast Static Route Configuration
Commands
3Com Corporation
6-1
Chapter 6 Multicast Static Route Configuration
Commands
6.1 Multicast Static Route Configuration Commands
6.1.1 delete rpf-route-static all
Syntax
delete rpf-route-static all
View
System view
Parameter
None
Description
Use the delete rpf-route-static all command to delete all the static multicast routes.
When using this command, the system will prompt you to acknowledge. All static
multicast routes will be deleted after your acknowledgement.
Related command: ip rpf-route-static and display multicast routing-table static.
Example
# Delete all the static multicast routes.
[3Com] delete rpf-route-static all
6.1.2 display multicast routing-table static
Syntax
display multicast routing-table static [ source mask ]
View
Any view
Parameter
source: IP address of multicast source (unicast address).
mask: IP address mask of multicast source.