Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-1
Chapter 1 MPLS Basic Configuration Commands
1.1 MPLS Basic Configuration Commands
1.1.1 debugging mpls lspm
Syntax
debugging mpls lspm { agent | all | event | ftn | interface | packet | policy | process
| vpn }
undo debugging mpls lspm { agent | all | event | ftn | interface | packet | policy |
process | vpn }
View
User view
Parameter
agent: Enables all MPLS Agent debugging.
all: Enables all MPLS-related debugging.
event: Enables debugging of various MPLS events.
ftn: Enables MPLS ftn debugging.
interface: Enables the MPLS debugging on the message sending/receiving interface.
packet: Enables MPLS packet debugging.
policy: Enables MPLS policy debugging.
process: Enables debugging of MPLS internal process.
vpn: Enables all MPLS VPN debugging.
Description
Use the debugging mpls lspm command to enable various LSP debugging.
Use the undo debugging mpls lspm command to disable the corresponding
debugging.
By default, all debugging is disabled.
This command is used to the debug MPLS LSPM. As debugging will affect the
performance of the router, you are recommended to use the command with caution.
Example
# Enable all MPLS LSP VPN debugging.