Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-7
# Execute the mpls command in interface view.
[3Com -Ethernet6/0/0] mpls
% Info: MPLS in the interface is starting, please wait...OK
1.1.8 mpls lsr-id
Syntax
mpls lsr-id ip-address
undo mpls lsr-id
View
System view
Parameter
ip-address: LSR ID, with the format like IP address, used to identify an LSR.
Description
Use the mpls lsr-id command to configure an LSR ID.
Use the undo mpls lsr-id command to delete an LSR ID.
By default, no LSR has an ID.
LSR-ID address must be the interface address of the router, and the address must be
reachable in the entire network. In general, it is recommended to use the address of the
loopback interface.
As a premise for configuring other MPLS commands, this command you can configure
an LSR ID.
Related command: display mpls interface.
Example
# Set the ID of the LSR to 202.17.41.246.
[3Com ] mpls lsr-id 202.17.41.246
% Mpls lsr-id changed.
1.1.9 reset mpls statistics
Syntax
reset mpls statistics { interface { all | interface-type interface-num } | lsp { lsp-index |
all | name lsp-name } }
View
User view