Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-8
Parameter
all: All interfaces or all LSPs
interface-type: Type of a network interface.
Interface-num: Number of a network interface.
lsp-Index: LSP index
name lsp-name: Name of LSP.
Description
Use the reset mpls statistics command to clear MPLS statistics.
You can use this command to clear the statistics on all or one interface(s); or the
statistics on all or one LSP(s).
Related command: display mpls statistics.
Example
# Clear statistics on the LSP named “citya-cityb”.
<3Com > reset mpls statistics lsp name citya-cityb
1.1.10 snmp-agent trap enable ldp
Syntax
snmp-agent trap enable ldp
undo snmp-agent trap enable ldp
View
System view
Parameter
None
Description
Use the snmp-agent trap enable ldp command to enable Trap function in MPLS LDP
creation.
Use the undo snmp-agent trap enable ldp command to disable Trap function in
MPLS LDP creation.
By default, TRAP function is not enabled during MPLS LDP creation.
Example
# Enable TRAP function during MPLS LDP creation.
[3Com ] snmp-agent trap enable ldp