Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-9
1.1.11 snmp-agent trap enable lsp
Syntax
snmp-agent trap enable lsp
undo snmp-agent trap enable lsp
View
System view
Parameter
None
Description
Use the snmp-agent trap enable lsp command to enable Trap function in MPLS LSP
creation.
Use the undo snmp-agent trap enable lsp command to disable Trap function in
MPLS LSP creation.
By default, TRAP function is disabled during MPLS LSP creation.
Example
# Enable TRAP function during MPLS LSP creation.
[3Com ] snmp-agent trap enable lsp
1.1.12 static-lsp egress
Syntax
static-lsp egress lsp-name incoming-interface interface-type interface-num in-label
in-label-value
undo static-lsp egress lsp-name
View
MPLS view
Parameter
lsp-name: Name of LSP.
interface-type: Type of network interface.
Interface-num: Number of network interface.
in-label-value: Value of inbound label, ranging from 16 to 1023.