Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-3
3.1.4 description
Syntax
description string
undo description
View
HWPing test group view
Parameter
string: Brief description about a test operation. By default, no description is configured.
Description
Use the description command to briefly describe a test operation.
Use the undo description command to delete the configured description.
Example
# Describe a test group as “icmp-test”.
[Router-administrator-icmp] description icmp-test
3.1.5 destination-ip
Syntax
destination-ip ip-address
undo destination-ip
View
HWPing test group view
Parameter
ip-address: Destination IP address in a test.
Description
Use the destination-ip command to configure the destination IP address in the test.
Use the undo destination-ip command to delete the configured destination IP
address.
By default, no destination IP address is configured for any test.
Related command: destination-port.
Example