Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-14
advertisement: Displays the debugging information during processing of LDP
advertisement.
session: Displays debugging information during processing of LDP session.
pdu: Displays the debugging information during processing of PDU.
notification: Displays the debugging information during processing of notification.
interface interface-type interface-number: Displays all the debugging information of a
specified interface.
remote: Displays debugging information of all remote peers.
Description
Use the debugging ldp command to enable debugging of LDP messages.
Use the undo debugging ldp command to disable debugging of LDP messages.
You can use this command to view LDP debugging information, but take caution when
doing so.
Example
# Enable LDP debugging.
<3Com > debugging mpls ldp all
1.2.2 display mpls ldp
Syntax
display mpls ldp
View
Any view
Parameter
None
Description
Use the display mpls ldp command to view LDP and LSR information.
Related command: mpls ldp, mpls ldp hops-count, mpls ldp loop-detection, mpls
ldp path-vectors.
Example
# Display LDP and LSR information.
[3Com ] display mpls ldp