Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-18
1.2.8 display mpls ldp session
Syntax
display mpls ldp session
View
Any view
Parameter
None
Description
Use the display mpls ldp session command to display the session between peer
entities.
Related command: mpls ldp enable.
Example
# Display the session between peer entities.
[3Com ] display mpls ldp session
Local LDP ID: 1.1.1.9:5; Peer LDP ID: 4.4.4.9:0
TCP Connection: 1.1.1.9 <- 4.4.4.9
Session State: Operational
Session Role: Passive
Session existed time:
Basic Hello Packets Sent/Received: 85/67
KeepAlive Packets Sent/Received: 1/1
Negotiated Keepalive hold time: 60 Peer PV Limit: 0
LDP Basic Discovery Source((A) means active):
Ethernet1/0/1.3(A) Ethernet1/0/1.2
Ethernet1/0/1.1
(A) in “Ethernet1/0/1.3(A)” displayed above indicates that the interface is the main
interface.
1.2.9 mpls label advertise
Syntax
mpls ldp advertise { implicit-null | explicit-null | non-null }
undo mpls ldp advertise { implicit-null | explicit-null | non-null }
View
MPLS view