Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-20
1.2.10 mpls ldp
Syntax
mpls ldp
undo mpls ldp
View
System view
Parameter
None
Description
Use the mpls ldp command to enable LDP.
Use the undo mpls ldp command to disable LDP.
By default, LDP is disabled.
Before enabling LDP, you must enable MPLS and configure LSR ID first.
Related command: mpls lsr-id.
Example
# Enable LDP.
[3Com ] mpls ldp
1.2.11 mpls ldp enable
Syntax
mpls ldp enable
mpls ldp disable
View
Interface view
Parameter
None
Description
Use the mpls ldp enable command to enable LDP on the interface.
Use the undo mpls ldp enable command to disable LDP on an interface.
By default, LDP is disabled on the interface.