Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-4
# Set the destination IP address in the test to 169.254.10.3.
[Router-administrator-icmp] destination-ip 169.254.10.3
3.1.6 destination-port
Syntax
destination-port port-number
undo destination-port
View
HWPing test group view
Parameter
port-number: Destination port number in a test. It is in the range 1 to 65535 and defaults
to 0.
Description
Use the destination-port command to configure the destination port in the test.
Use the undo destination-port command to delete the configured destination port.
By default, no destination port is configured for any test.
 Note:
This command is configured only for DHCP, DLSw, FTP, HTTP, jitter, TCP-private, or
UDP-private test.
Related command: destination-ip.
Example
# Set the destination port to 9000 in the test.
[Router-administrator-icmp] destination-port 9000
3.1.7 display hwping
Syntax
display hwping { result | history | jitter } [ administrator-name operation-tag ]
View
Any view