Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-22
View
System view
Parameter
None
Description
Use the mpls ldp loop-detect command to enable loop detection.
Use the undo mpls ldp loop-detect command to disable loop detection.
By default, loop detection is disabled in the system.
This command should be configured before LDP is enabled on any interface.
Related command: mpls ldp hops-count and mpls ldp path-vectors.
Example
# Enable loop detection.
[3Com ] mpls ldp loop-detect
# Disable loop detection.
[3Com ] undo mpls ldp loop-detect
1.2.14 mpls ldp password
Syntax
mpls ldp password { cipher | simple } password
undo mpls ldp password
View
Interface view, remote-peer view
Parameter
simple: Transmits password in plain text.
cipher: Transmits password in encrypted text (MD5).
password: User password.
Description
Use the mpls ldp password command to configure LDP authentication mode.
Use the undo mpls ldp password command to delete the configuration.
Example
# Configure the LDP authentication mode to be in plain text, with a password of 123.