Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 1 MPLS Basic Configuration Commands
3Com Corporation
1-24
Parameter
Index: Index of remote peer entity, used to identify an entity. It ranges from 0 to 99.
Description
Use the mpls ldp remote-peer command to create a remote-peer entity and enter
remote-peer view.
Use the undo mpls ldp remote-peer command to delete a remote-peer entity.
You can use this command to create a remote-peer and accordingly create remote
session.
Related command: remote-peer.
Example
# Create a remote-peer.
[3Com ] mpls ldp remote-peer 22
[3Com -mpls-remote22]
# Delete a remote-peer.
[3Com -mpls-remote22] undo mpls ldp remote-peer 22
[3Com ]
1.2.17 mpls ldp reset-session
Syntax
mpls ldp reset-session peer-address
View
Interface view
Parameter
peer-address: Corresponding LDP Peer address (in IP address format).
Description
Use the mpls ldp reset-session command to reset a specified session on an
interface.
After LDP is configured on an interface and LDP session is created, this command can
be used to reset a specific session on the interface. You only need to specify the
address of the peer corresponding to the session to be reset.
Related command: mpls ldp and mpls ldp enable.
Example
# Reset the session at the interface Ethernet0/0/0.