Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 BGP/MPLS VPN Configuration
Commands
3Com Corporation
2-1
Chapter 2 BGP/MPLS VPN Configuration
Commands
2.1.1 apply access-vpn vpn-instance
Syntax
apply access-vpn vpn-instance [ vpn-name1 vpn-name2 … ]
undo apply access-vpn vpn-instance [ vpn-name1 vpn-name2 … ]
View
Route-policy view
Parameter
vpn-name: Name of the configured VPN instance. At most, 6 VPN names can be
configured.
Description
Use the apply access-vpn vpn-instance command to specify to search private
network forwarding routes in vpn-name1, vpn-name2, vpn-name3, vpn-name4,
vpn-name5, vpn-name6 (if they all exist) and forward packets after policy routing is
enabled to satisfy route-policy.
Use the undo apply access-vpn vpn-instance command to remove this function.
Example
# Specify the configured VPN instance.
[3Com -route-policy] apply access-vpn vpn-instance vpn1
2.1.2 apply mpls-label
Syntax
apply mpls-label
undo apply mpls-label
View
Route-policy view
Parameter
None