Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 BGP/MPLS VPN Configuration
Commands
3Com Corporation
2-2
Description
Use the apply mpls-label command to assign MPLS labels for public network routes
that match route-policy filter conditions.
Use the undo apply mpls-label command to remove the configuration.
By default, no label is assigned for public network routes.
Related command: if-match mpls-label.
Example
# Define an apply clause to assign labels for public network routes that match
route-policy filter conditions.
[3Com -route-policy] apply mpls-label
2.1.3 description
Syntax
description vpn-instance-description
undo description
View
Vpn-instance view
Parameter
vpn-instance-description: Specifies the description information of VPN instance.
Description
Use the description command to configure description information for a specified VPN
instance.
Use the undo description command to remove the description of a VPN instance.
Example
# Configure description information of VPN.
[3Com -vpn-vpna] description huawei
2.1.4 display bgp routing label
Syntax
display bgp routing label
View
Any view