Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 BGP/MPLS VPN Configuration
Commands
3Com Corporation
2-3
Parameter
None
Description
Use the display bgp routing label command to view routing information and label
information in the BGP routing table.
For common IPv4 routes without labels, “Null” is displayed.
When you view the BGP routing information by using the display bgp routing address
[ mask ] command, you can see the label information if the routes have labels.
Example
# Display BGP routing information.
<3Com > display bgp routing label
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
In/out
Dest/Mask Next-Hop Label
--------------------------------------------------------------
#^ 9.0.0.1/32 0.0.0.0 1024/-
# Display specific BGP routing information.
<3Com > display bgp routing 9.0.0.1
BGP routing table entry information of 9.0.0.1/32
Age : 00:00:32
From : local
State : valid, sourced, active,
Nexthop : 0.0.0.0
Origin : INC
As-path : (null)
Med : 1563
In/Out label : 1024/-
2.1.5 display bgp vpnv4
Syntax
display bgp vpnv4 { all | route-distinguisher rd-value | vpn-instance
vpn-instance-name } { group [ group-name ] | network | peer [ ip-address1 | verbose ]
| routing [ ip-address2 | statistic ] [ label ] [ as-path-acl as-path-acl | cidr |
community [ community-number | no-advertise | no-export | no-export-subconfed |
whole-match ] | community-list community-list [ whole-match ] | different-origin-as
| peer ip-address1 [ advertised | received] | regular-expression text ] }