Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-5
Parameter
result: Displays the test result.
history: Displays the test history.
jitter: Displays the jitter test information.
administrator-name: Name of the administrator creating the test.
operation-tag: Test operation tag.
Description
Use the display hwping command, you can view test result(s).
If a test group is specified using the arguments of administrator-name and
operation-tag, the system displays only the test result of the group; if not, it displays the
test results of all the test groups.
Related command: test-enable.
Example
# Display the test result.
[router-hwping-administrator-icmp] display hwping result administrator icmp
HWPing entry(admin administrator, tag icmp) test result:
Destination ip address:169.254.10.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 1/2/1
Square-Sum of Round Trip Time: 13
Last complete test time: 2004-11-25 16:28:55.0
Extend result:
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors:0 Drop operation number:0
Operation statistics errors:0
Table 3-1 Fields in the output of the display hwping result command
Field Description
Destination ip address Destination IP address.
Send operation times The number of the sent test packets.
Receive response times The number of successful test attempts
Min/Max/Average Round Trip Time
Roundtrip time in its minimum,
maximum, and average
Square-Sum of Round Trip Time The square sum of roundtrip time
Last complete test time
The time of the last successful test
attempt