Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 BGP/MPLS VPN Configuration
Commands
3Com Corporation
2-5
Example
Display the information about all BGP VPNv4 routing-table.
[3Com ] display bgp vpnv4 all routing
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
In/out As
Dest/mask Next-hop Med Local-pref label path
Route Distinguisher:1.1.1.1:1 (VPN instance:v1)
#^ 1.0.0.0 0.0.0.0 1024/-
Routes total: 49194533
2.1.6 display ip routing-table vpn-instance
Syntax
display ip routing-table vpn-instance vpn-instance-name [ statistics | [ ip-address ]
[ verbose ] ]
View
Any view
Parameter
vpn-instance-name: Name assigned to vpn-instance.
ip-address: Displays information of the specified address.
verbose: Displays detailed information.
statistics: Displays the digests of all the routes.
Description
Use the display ip routing-table vpn-instance command to view the specified
information in the IP routing table of vpn-instance.
Example
# Display the IP routing table associated with the vpn-instance.
[3Com ] display ip routing-table vpn-instance vpn-instance1
Routing Table: vpn-instance1 RD: 1233:11
Destination/Mask Proto Pre Metric Nexthop Interface
192.1.1.0/24 Direct 0 0 192.1.1.1 GigabitEthernet1/0/0
192.1.1.1/32 Direct 0 0 127.0.0.1 InLoopBack0
192.1.1.255/32 Direct 0 0 127.0.0.1 InLoopBack0