Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 BGP/MPLS VPN Configuration
Commands
3Com Corporation
2-9
2.1.11 if-match mpls-label
Syntax
if-match mpls-label
undo if-match mpls-label
View
Route-policy view
Parameter
None
Description
Use the if-match mpls-label command to configure to match public network routes
with MPLS labels only.
Use the undo if-match mpls-label command to remove the match rules.
Related command: apply mpls-label.
Example
# Define an if-match clause to permit the filtering of routes with labels.
[3Com -route-policy] if-match mpls-label
2.1.12 import-route ospf
Syntax
import-route { ospf | ospf-ase | ospf-nssa } [ process-id ] [ med value | route-policy
route-policyname ]
undo import-route { ospf | ospf-ase | ospf-nssa } [ process-id ]
View
BGP unicast/multicast view, MBGP VPN-instance address family view
Parameter
process-id: OSPF process ID. By default, it is 1.
ospf: Imports only the ASE internal route discovered by OSPF process with process-id
as the external route information.
ospf-ase: Imports only the OSPF-ASE route discovered by OSPF process with
process-id as the external route information.
ospf-nssa: Imports only the OSPF-NSSA route discovered by OSPF process with
process-id as the external route information.