Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 BGP/MPLS VPN Configuration
Commands
3Com Corporation
2-10
med value: Route cost value
route-policyname: Route policy name
Description
Use the import-route ospf command to enable to import OSPF route.
Use the undo import-route ospf command to disable to import OSPF route.
Caution:
By default, the process ID is 1.
Example
# Enable to import an OSPF route with process ID 100.
[3Com ] ip vpn-instance sphinx
[3Com -vpn-sphinx] route-distinguisher 168.168.55.1:85
[3Com -vpn-sphinx] quit
[3Com ] bgp 352
[3Com -bgp] ip vpn-instance sphinx
[3Com -bgp-af-vpn-instance] import-route ospf 100
2.1.13 ip binding vpn-instance
Syntax
ip binding vpn-instance vpn-instance-name
undo ip binding vpn-instance vpn-instance-name
View
Interface (including subinterface) view
Parameter
vpn-instance-name: Name assigned to vpn-instance.
Description
Use the ip binding vpn-instance command to bind an interface or subinterface to a
vpn-instance.
Use the undo ip binding vpn-instance command to delete the binding.
By default, global routing table is used.