Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 BGP/MPLS VPN Configuration
Commands
3Com Corporation
2-16
# Enable OSPF protocol with process ID 120.
[3Com ] router id 10.110.1.8
[3Com ] ospf 120
[3Com -ospf-120]
# Enable OSPF process with process ID 100, specify its route ID to 2.2.2.2, and bind it
to VPN instance vpn1.
[3Com ] ospf 100 router-id 2.2.2.2 vpn-instance vpn1
[3Com -ospf-100]
2.1.18 peer default-route-advertise
Syntax
peer group-name default-route-advertise
undo peer group-name default-route-advertise
View
BGP view, MBGP IPv4-family view
Parameter
group-name: Peer group name.
Description
Use the peer default-route-advertise command to enable a peer (group) to import a
default route.
Use the undo peer default-route-advertise command to remove the existing
configuration.
By default, a peer (group) does not import default route.
This command does not require any default route in the routing table but transmits a
default route with the next hop being itself to the peer unconditionally.
Example
# Enable the peer (group) test to import a default route.
[3Com –bgp] peer test default-route-advertise
2.1.19 peer label-route-capability
Syntax
peer group-name label-route-capability
undo peer group-name label-route-capability