Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 BGP/MPLS VPN Configuration
Commands
3Com Corporation
2-17
View
BGP view
Parameter
group-name: Indicates name of peer group.
Description
Use the peer label-route-capability command to enable the capability of a peer to
process IPv4 routes with labels. Use the undo peer label-route-capability command
to disable the capability.
By default, BGP peer cannot process IPv4 routes with labels.
Example
# Enable the capabilities of IBGP and EBGP peer groups to process IPv4 routes with
labels.
[3Com -bgp] group ibgp internal
[3Com -bgp] peer ibgp label-route-capability
[3Com -bgp] group ebgp external
[3Com -bgp] peer ebgp label-route-capability
2.1.20 peer next-hop-invariable
Syntax
peer group-name next-hop-invariable
undo peer group-name next-hop-invariable
View
BGP view, BGP-VPNv4 subaddress family view, BGP VPN-Instance view, BGP-IPv4
multicast subaddress family view
Parameter
group-name: Indicates name of peer group.
Description
Use the peer next-hop-invariable command to configure the invariable next hop when
sending routes to EBGP peers.
Use the undo peer next-hop-invariable command to restore the default configuration.
By default, BGP Speaker varies the next hop to itself when sending routes to EBGP
peers.