Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 MPLS L2VPN Configuration Commands
3Com Corporation
3-4
static-lsp egress lsp-name l2vpn incoming-interface interface-type interface-num
in-label in-label
undo static-lsp egress lsp-name l2vpn
View
MPLS view
Parameter
lsp-name: LSP name
interface-type Interface-num: Interface type and interface number
in-label-value: Inbound label value, in range of 16 to 1024
Description
Use the static-lsp egress l2vpn command to configure a static LSP used in L2VPN for
egress LSR.
Use the undo static-lsp egress l2vpn command to delete an LSP used in L2VPN of
egress LSR.
Two LSPs (one in each direction) should be created in advance before creating a
remote CCC connection.
Related command: static-lsp ingress l2vpn, debugging mpls.
Example
# Add a static LSP citya-city at egress LSR.
[3Com -mpls] static-lsp egress citya-cityb l2vpn incoming-interface
serial8/0/0 in-label 233
3.1.6 static-lsp ingress l2vpn
Syntax
static-lsp ingress lsp-name { l2vpn | destination ip_addr } { nexthop next-hop-addr |
outgoing-interface interface-type interface-num } out-label out-label
undo static-lsp ingress lsp-name l2vpn
View
MPLS view
Parameter
lsp-name: LSP name
next-hop-addr: Next hop address
interface-type Interface-num: Interface type and interface number