Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 MPLS L2VPN Configuration Commands
3Com Corporation
3-6
Use the undo static-lsp transit command to delete an LSP used in L2VPN of transit
LSR.
Two LSPs (one in each direction) should be created in advance and configured to the
transit LSR before creating a remote CCC connection.
Related command: static-lsp egress l2vpn and static-lsp ingress l2vpn.
Example
# Add a static LSP used in 12vpn for the Serial0/0/0 of transit LSR, with inbound label
123 and outbound label 253.
[3Com -mpls] static-lsp transit citya-cityb l2vpn incoming-interface
serial0/0/0 in-label 123 nexthop 202.34.114.7 out-label 253
3.2 SVC MPLS L2VPN Configuration Commands
3.2.1 display mpls static-l2vc
Syntax
display mpls static-l2vc [ interface interface-type interface-num ]
View
Any view
Parameter
interface-type interface -num: Interface type and interface number
Description
Use the display mpls static-l2vc command to view the connection information of
static MPLS L2VPN.
Example
# Display basic information of static connections.
[3Com -Ethernet1/0/1] display mpls static-l2vc
total connections: 1, 0 up, 1 down
ce-intf state destination tr-label rcv-label tnl-type tnl-index
Ethernet1/0/1 down 192.1.1.1 222 111 -- 0
[3Com ] display mpls static-l2vc interface ethernet1/0/1
CE-interface: Ethernet1/0/1 is up, VC State: down, Destination: 192.1.1.1,
transmit-vpn-label: 222, receive-vpn-label: 111,
tunnel type: --, tunnel index: 0