User Manual

Removal and Replacement Procedures
5. Disconnect the cable from the PCI backplane.
Figure 2-39: Disconnecting the cable from the PCI backplane
(PCI basket removed for clarity)
6. Open an expansion slot latch and remove the expansion board or expansion slot cover.
Refer to the “PCI and PCI-X Hot Plug Expansion Boards” section in this chapter.
7. Remove the expansion slot latch:
a. Press upward on the bottom of the clear plastic latch from the outside of the
chassis (1).
b. Pull the latch away from the inner wall of the chassis (2).
Figure 2-40: Removing an expansion slot latch
8. Repeat steps 6 and 7 for each remaining expansion slot.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide 2-49