Maintenance and Service Guide

Remove the power button board:
1. Remove the rubber pad (1) that protects the power button board cable ZIF connector.
2. Release the ZIF connector (2) to which the power button board cable is attached, and then
disconnect the power button board cable from the system board.
3. Detach the power button board (3) from the display panel assembly. (The power button board is
attached to the display panel assembly with double-sided adhesive.)
4. Remove the power button board and cable.
Reverse this procedure to install the power button board and cable.
Volume button board
Description Spare part number
Volume button board (includes cable, double-sided adhesive, and rubber pad) 744541-001
Before removing the volume button board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
HP Slate10 HD
23