Maintenance and Service Guide

Audio board
Description Spare part number
Audio board (includes audio jack and bracket) 744537-001
Before removing the audio board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 18).
5. Disconnect the battery cable from the system board (see
Battery on page 20).
Remove the audio board:
1. Release the ZIF connector (1) to which the card reader board cable is attached, and then
disconnect the card reader board cable from the audio board.
2. Remove the two Phillips PM2.0×2.75 screws (2) that secure the audio board and bracket to the
display panel assembly.
3. Remove the audio board bracket (3) and the audio board (4).
HP Slate10 HD
27