HP Spectre x360 13 Convertible PC - Maintenance and Service Guide

Infrared sensor board cable
Description Spare part number
Infrared sensor board cable 942832-001
Before removing the infrared sensor board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 29).
5. Disconnect the battery cable from the system board (see Battery on page 31).
6. Remove the right fan (see Fans on page 35).
Remove the infrared sensor board cable:
1. Turn the right fan upside down.
2. Release the ZIF connector (1) to which infrared sensor board cable is connected, and then disconnect
the infrared sensor board cable from the infrared sensor board.
3. Release the infrared sensor board cable from the retention clip (2) built into the right fan.
4. Remove the infrared sensor board cable (3).
5. Remove the infrared sensor board cable.
Component replacement procedures 37