HP Spectre x360 13 Convertible PC - Maintenance and Service Guide

Audio jack board cable
Description Spare part number
Audio jack board cable 942832-001
Before removing the audio jack board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 29).
5. Disconnect the battery cable from the system board (see Battery on page 31).
Remove the audio jack board cable:
1. Release the ZIF connector (1) to which audio jack board cable is connected, and then disconnect the audio
jack board cable from the system board.
2. Release the ZIF connector (2) to which audio jack board cable is connected, and then disconnect the audio
jack board cable from the audio jack board.
3. Remove the audio jack board cable (3).
Reverse this procedure to install the audio jack board cable.
Component replacement procedures 39