HP PC Commercial BIOS (UEFI) Setup Administration Guide For Commercial Platforms using HP BIOSphere Gen 3-5 2016 -2019 Technical Whitepaper

HP PC Commercial BIOS (UEFI) Setup
June 2019
919946-004
© Copyright 2016-2019 HP Development Company, L.P.
5 Advanced Menu 33
Feature
Type
Description
Default
Notes
 Legacy
Boot Order
Setting
When checked, allows the system to boot from non-UEFI devices.
Requires Legacy Boot Enable and Secure Boot Disable. See Secure
Boot Configuration > Configure Legacy Support and Secure Boot.
When Legacy Boot is Disabled, the check boxes for UEFI Boot Order
and Legacy Boot Order are disabled, because only UEFI devices can
boot in this mode.
When enabling the UEFI Boot Order, the system attempts to boot
from all UEFI devices before any non-UEFI devices.
Arrange the boot order from the non-UEFI devices found. By
default, the system arranges the boot order by device type using
the following precedence:
1. USB
2. SATA DVD (Desktop Only)
3. SATA Hard Drives
4. M.2 devices
5. Network Boot
NOTE: No boot devices are shown if Legacy Support is off.
Checked
5.5 HP Sure Recover
Table 22 HP Sure Recover
Feature
Type
Description
Default
Notes
HP Sure
Recover
Setting
If this setting is enabled and HP Sure Recover is launched,
the system firmware honors local and remote requests
to reinstall the OS. If it is disabled, all requests to reinstall
the OS are ignored.
Checked
Recover from
Network
Setting
If this is enabled, the system firmware obtains the
recovery agent from the network. Otherwise, the system
firmware obtains the recovery agent from a local drive.
Unchecked
Assuming
Windows 10 is
preinstalled.
Recover after
Boot Failure
Setting
If this setting is enabled and no bootable UEFI OS is
found, the system firmware launches HP Sure Recover.
Unchecked
Assuming
Windows 10 is
preinstalled.
Prompt before
Boot Failure
Recovery
Setting
If this setting is enabled and HP Sure Recover is launched
because of a boot failure, the user is notified of the boot
failure and asked to choose whether to start or cancel HP
Sure Recover.
Checked
Not shown if
Recover after Boot
Failure is
unchecked.
Recovery
Agent
Label
Not shown unless
Recover from
Network checked.
URL:
Location of the current recovery agent URL.
Not shown unless
Recover from
Network checked.
Username:
User name (optional) to access the recovery agent.
Not shown unless
Recover from
Network checked.