HP PC Commercial BIOS (UEFI) Setup Administration Guide For Commercial Platforms using HP BIOSphere Gen 3-5 2016 -2019 Technical Whitepaper

HP PC Commercial BIOS (UEFI) Setup
June 2019
919946-004
© Copyright 2016-2019 HP Development Company, L.P.
5 Advanced Menu 42
Feature
Type
Description
Default
Notes
 Wake on LAN in
Battery Mode
Setting
When checked and powered by battery, enables the
notebook to wake via LAN.
Unchecked
Notebook Only
 Fan Always on
while on AC Power
Setting
When checked, leaves the fan on while running on AC
power.
Unchecked
Notebook Only
Increase Idle Fan
Speed (%)
Setting
Controls the minimum fan speed during periods that
the fan would normally be off under the control of the
desktop thermal sensor. Choose a percentage of the
maximum fan speed: 0 –100%.
0
Desktop Only
 Boost Converter
Setting
When checked, the notebook draws power from the
battery when the system is on AC to give the CPU a
momentary performance gain by increasing the
overall power available to the CPU.
Checked
Notebook Only
Backlit Keyboard
Timeout
Setting
Specifies the timeout period for the keyboard’s
backlight LEDs. The following settings are possible:
• 5 secs
• 15 secs
• 30 secs
• 1 min
• 5 min
• Never
15 seconds
Notebook Only
 Automatic
Keyboard Backlit
Setting
When checked, keyboard backlight level is affected by
ambient light level. The keyboard backlight will remain
off while in bright environments to save power.
Checked
Select
products only
 Force enable HP
Sure View
Setting
When checked, enables HP Sure View’s privacy panel
by changing the screen brightness
Unchecked
HP Sure View
only
Disable Battery on
next shut down
Action
When checked, the battery is put in storage mode
when the system is next shut down. AC power is
required to turn on the system afterwards.
Unchecked
Requires
administrator
password set
 RFID
Setting
When checked, enables the RFID reader.
Checked
Select
products only