HP PC Commercial BIOS (UEFI) Setup Administration Guide For Commercial Platforms using HP BIOSphere Gen 3-5 2016 -2019 Technical Whitepaper

HP PC Commercial BIOS (UEFI) Setup
June 2019
919946-004
© Copyright 2016-2019 HP Development Company, L.P.
5 Advanced Menu 46
Feature
Type
Description
Default
Notes
 Unique Sleep
State Blink Rates
Setting
When checked, when the desktop is in the S4 power state,
the power LED periodically blinks four times with a pause.
Unchecked, the desktop does not blink at all in S4 (the
same as S5, power off)
This also affects S3 blink behavior. When checked, the
desktop power LED periodically blinks three times with a
pause, unchecked it blinks once per period.
Unchecked
Desktop Only
 Wake when
Lid is Opened
Setting
When checked, opening the lid wakes the notebook from
sleep mode
Unchecked
Notebook Only
 Wake when AC
is Detected
Setting
When checked, allows the system to resume from sleep
when AC power is detected
Notebook Only
 Wake on USB
Setting
When checked, allows the system to resume from sleep
when a USB input device is triggered (such as mouse
movement or keyboard key-press).
Checked
Notebook Only
 Power Control
Setting
When checked, enables the notebook to support power
management applications such as IPM+ that help
enterprises reduce power costs by intelligently managing
the battery usage of the notebook.
Unchecked
Notebook Only
 Configure
Battery Charge
Setting
When checked, enables support for HPPM 2.0
Unchecked
Select products
only
Battery Health
Manager
Setting
Sets charging policy based on optimizing for battery life or
battery duration. The possible settings are:
• Maximize my battery health
• Let HP manage my battery duration
• Maximize my battery duration
Maximize my
battery duration
Notebook Only
 Modern
Standby
Setting
Low power standby mode. This mode replaces the
traditional ACPI S3 sleep and S4 hibernation states.
Enable
Only supported
on select
notebooks
5.12 Remote Management Options Menu (Intel Only)
The following table describes various setting options for Remote Management Options.
Table 29 Remote Management Options Menu features
Feature
Type
Description
Default
Notes
 Active
Management
Technology
(AMT)
Setting
This setting controls the Intel Management Engine (ME)
state. When checked, this enables all ME functionality
including AMT, DAL, NFC, Protected Content Playback,
Intel Identity Protection Technology, and Capability
Licensing Service. When unchecked, none of these Intel
ME provided capabilities are available.
Checked
Intel Only
 USB Key
Provisioning
Support
Setting
When checked, enables AMT provisioning using a USB
storage device.
Unchecked
Intel Only