HP PC Commercial BIOS (UEFI) Setup Whitepaper

August 2018
919946-003
HP PC Commercial BIOS (UEFI) Setup
© Copyright 2016-2018 HP Development Company, L.P.
5 Advanced Menu 29
Feature
Type
Description
Default
Notes
 UEFI Boot
Order
When checked, allows the system to boot from UEFI devices.
When Legacy Boot is Disabled, the check boxes for UEFI Boot Order
and Legacy Boot Order will grayed out and not functional, because
only UEFI devices can boot in this mode.
When enabling the UEFI Boot Order, the system attempts to boot
from all UEFI devices before any non-UEFI devices.
Arrange the boot order from the UEFI devices found. By default, the
system will arrange the boot order by device type using the following
precedence:
1. USB
2. SATA DVD (select products only)
3. SATA Hard Drives
4. M.2 devices
5. Network Boot
Checked
Numlock on
at Boot
Setting
Set the keyboard Num Lock control to be on or off when system is
booted.
 Legacy
Boot Order
Setting
When checked, allows the system to boot from non-UEFI devices.
Requires “Legacy Boot Enable and Secure Boot Disable.” See “Secure
Boot Configuration” -> “Configure Legacy Support and Secure Boot”
When Legacy Boot is Disabled, the check boxes for UEFI Boot Order
and Legacy Boot Order will grayed out and not functional, because
only UEFI devices can boot in this mode.
When enabling the UEFI Boot Order, the system attempts to boot
from all UEFI devices before any non-UEFI devices.
Arrange the boot order from the non-UEFI devices found. By default,
the system will arrange the boot order by device type using the
following precedence:
1. USB
2. SATA DVD (select products only)
3. SATA Hard Drives
4. M.2 devices
5. Network Boot
Checked