HP Elite x2 1012 G2 Tablet HP Elite x2 1012 G2 Tablet with Collaboration Keyboard - Maintenance and Service Guide

Display panel

LCD 12.3 WQXGA+BrightView UWVA with bezel, infrared camera, and touch screen 924438-001

LCD 12.3WQXGA+BrightView UWVA with bezel and touch screen 925556-001

LCD cable kit 924453-001

IMPORTANT: Make special note of each screw and screw lock size and location during removal and

replacement.

Before removing the display panel, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the following components:

a. Kickstand (see Kickstand on page 26).

b. Back cover (see Back cover on page 29)

Remove the display panel:

1. Use a suction tool to loosen all 4 corners of the display panel (1), and then lift the panel carefully to

remove it (2).

30 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts