HP SmartStream 3D Command Center 3.2 installation and troubleshooting guide

Technical Newsletter | HP SmartStream 3D Command Center 3.2 installation and troubleshooting guide
11
Click the options "…" icon and select Administrator password. Type the administrator password in and press the OK
button:
Again, if you don’t remember the password, you will need a Service intervention to reset it.
Device hostname
1) You must use hostnames or static IP address for your devices.
You can get the pre-assigned hostname for a device in the connectivity application on its front panel by going to:
Settings > Connectivity > Network > Gigabit Ethernet > Network Identification > Host Name.