HP SmartStream 3D Command Center 3.2 installation and troubleshooting guide

Technical Newsletter | HP SmartStream 3D Command Center 3.2 installation and troubleshooting guide
9
Connectivity check
1) Open HP SmartStream 3D Command Center Client and click the gear icon on the top-right corner.
2) You should stay connected to the Server. Click Network connectivity and connect to your Server.
3) Check that you don’t have any connectivity issues: click the bell icon on the top-right corner.
If you have issues, first fix them. Check if your network is blocking the HP Cloud connections.
Adding devices
Device security password
A device security password is needed for each device to be able to associate it to your Command Center.
1) Click the Settings menu on the device’s front panel.