Owner manual

6. To see details about the zone group, select the zone group in the navigation tree and click
More Information. As shown in this example, the display for the zone group shows that the
servers in device bays 1 and 6 have been assigned this zone group.
7. After all server device bays have been granted access to the zone group, the switch and the
zoning setup is complete.
a. In the VSM CLI, capture the configuration for safekeeping. (Strongly recommended)
b. Proceed to the user documents for the storage enclosure and configure the storage into
logical units (LUNs).
26 Example: Configuring shared SAS storage enclosures