Owner manual

Network Settings task
Use this task to enter or modify information about the external network.
To perform this task, expand the display for the active switch in the navigation tree, and then click
Network Settings.
Options for this task include:
• Host Name—16 character user-defined name for the switch. Can be any combination of
numbers, letters, or special characters, but can not include spaces. In OA, is referred to as
the User Assigned Name of the switch.
• IP Configuration—Internet Protocol (IP) address configuration options include:
DHCP – Automatic—The switch is assigned an IP address automatically from a Dynamic
Host Configuration Protocol (DHCP) server on the network.
◦
◦ Manual—The IP address must be assigned manually.
NOTE: When the Manual option is selected, the display changes and fields are provided
for entering the IP Address, Subnet Mask, Gateway, Primary DNS Server, and Secondary
DNS server.
SNMP Settings task
Use this task to enable, disable, and configure SNMP alerts.
To perform this task, expand the display for the switch in the navigation tree, and then click SNMP
Settings.
Options for this task include:
• Disabled—Do not allow SNMP alerts.
• Enabled—Allow SNMP alerts.
NOTE: When the Enabled option is selected, the display changes and fields are provided
for entering the System Location, System Contact, Read Community, Alert Community, and
Alert Community IP Address.
System Log task
Use this task to view the system log for the selected switch.
To perform this task, expand the display for the active switch in the navigation tree, and then click
System Log.
Options for this task include:
• Download—Save the log file to a location on the system. The default file name is syslog.zip.
• Print—Print a hardcopy of the log.
54 Tasks in the VSM Maintain tab