HP LaserJet Managed E50045 - User Guide
Energy-conservation settings
Introduction
●
Print with EconoMode
●
Set the Sleep/Auto O After Inactivity setting
●
Set the sleep timer and congure the printer to use 1 watt or less of power
●
Set the sleep schedule
●
Set the Delay Shut Down setting
Congure sleep settings to reduce power usage when the printer is idle.
Print with EconoMode
This printer has an EconoMode option for printing drafts of documents. Using EconoMode can use less toner.
However, using EconoMode can also reduce print quality.
HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might
outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable,
consider replacing the toner cartridge.
NOTE: If this option is not available in the print driver, set it using the printer control panel.
Congure EconoMode from the print driver
1. From the software program, select the Print option.
2. Select the printer, and then click the Properties or Preferences button.
3. Click the Paper/Quality tab.
4. Click the EconoMode check box to enable the feature, and then click OK.
Congure EconoMode from the printer control panel
1. From the Home screen on the printer control panel, open the Settings menu.
2. Open the following menus:
● Copy/Print or Print
● Default Print Options
● Economode
3. Select On or O to enable or disable the feature.
Set the Sleep/Auto O After Inactivity setting
Use the control panel menus to set the amount of idle time before the printer enters sleep mode.
Complete the following procedure to change the Sleep/Auto O After setting:
ENWW Energy-conservation settings 57