HP LaserJet Managed MFP E52545 - User Guide
Scan and save to a USB ash drive
Introduction
The printer can scan a le and save it on a USB ash drive. Before using this feature, use the HP Embedded Web
server to enable and congure it.
Scan and save the document to a USB ash drive
NOTE: You might be required to sign in to the printer to use this feature.
1. Place the document face-down on the scanner glass, or place it face-up in the document feeder and adjust
the paper guides to t the size of the document.
2. Insert the USB ash drive into the USB port near the printer control panel.
3. From the Home screen on the printer control panel, select Scan, and then select Scan to USB Drive.
4. From the Save As... list, select the ash drive. Save the le on the root of the USB ash drive, or save it in an
existing folder.
5. Touch the File Name text eld to open a keyboard, and then type the name for the le, and then touch the
Enter button.
6. To congure settings for the document, touch the Options button. For example:
● Select File Type and Resolution to specify the type of le to create, the resolution, and the output
quality.
● If the original document is printed on both sides, select Original Sides, and then select 2 Sided.
7. Set options marked with a yellow triangle before using the preview feature.
NOTE: After the preview scan, these options are removed from the main Options list and are summarized
in the Pre-scan Options list. To change any of these options, discard the preview and start over.
Using the preview feature is optional.
8. Touch the right pane of the screen to preview the document. In the preview screen, use the buttons on the
right of the screen to adjust the preview options and to rearrange, rotate, insert, or remove pages.
Use these buttons to toggle between single-page view and thumbnail view. More options are
available in thumbnail view than in single-page view.
ENWW Scan and save to a USB ash drive 107